WARNING BEFORE CHECKS bootloader unlock
CODE PRODUCTION HHunder 11w26: SAFEbetween 11w26 - 11w37: need to be
vigilant11w38 above: GUARANTEED HARDBRICK
Unlockbootloader myths about what can do
1. Real dual touch for synaptic devices.
2. Higher overclock CPU max frequency.
3. Sim unlock your phone (allowing use any carrier)
Before I start, here I emphasize that the bootloader is verydangerous and will result in hard brick if you do not follow the instructions properly. Then you need to go to repair your phone by sending it to SE. I will not be responsible if your phone died because you did not follow the instructions or your own self do wrong. I also need to emphasize here that this may cancel your hp warranty.
Still interested? please see details below.
Requirements: Root phone, the Sony Ericsson PC Companion installed kat PC AND Courage.
You do not need to have a sim lock your phone to make UnlockBootloader.
Recommended: Disable your antivirus (it might find a "virus" in ADB.exe although none of the actual virus. Use the stock rom.
Note: Opening UnlockBootloader, your phone will restore the original sim lock your phone. unless you have a key to Emma / IMEIkod unlock or it is not factory-unlocked or if SE unlocked!
1. Downloading files needed to UnlockBootloader.
Link: http://www.mediafire.com/?k9rp060165j2v84
Files needed to determine whether your phone safe UnlockBootloader
S1tool Link: http://www.mediafire.com/?0q97l5fs20pj947
1a. Download Flashtool once (required S1tool to function properly and to Flash Custom kernal in the future) and Install (not necessary if you already have Flashtool):
Download and Install Flashtool v0.6.7.0 here: http://www.mediafire.com/?3tsqz6ppxp9eset
After Install, open the flashtool folder and open the drivers folder inside. Double-click on drivers.exe Flashtool Flashtool files and install-drivers.exe file.
Note: Installation of this Flashtool-drivers will detect for X8, X10 mini and X10mini pro. I'm not sure about from the W8 but I think that is also supported.
Then restart your computer.
Also, download and install Sony Ericsson PC Companion (not required if you already have the Sony Ericsson PC Companion on your computer) (required to process UnlockBootloader).
Link: http://www.sonyericsson.com/cws/supp...61?cc=gb&lc=enDirect download link: http://dl-www.sonyericsson.com/cws/d...01.217_Web.exe
Then double click the file. Exe and install Sony Ericsson PC Companion. connect your phone to the PC after doing this and open Sony Ericsson PC Companion. Make sure your phone is recognized by the Sony Ericsson PC Companion.
2.Unzip files needed to UnlockBootloader (S1tool and msm7227p) on your PC.
Note: If your antivirus finds virus in ADB.exe., Turn off the antivirus. There is no virus in ADB.exe
2a. Turn off your phone.
2b. Go to the directory you unzipped and run S1tool.exe S1tool. Then, click on IDENTIFY button before proceeding to step 2c.
2c. Boot your phone into flashmod (make sure you install Flash Driver in step 1a 1). All users, press the back button while connecting cable from the PC to the phone. Continue to press the back button until you get output. LED on your phone should flash green if it is in flashmod.
Sample output:
9/9/2011 21:41:44 Welcome to S1 identify tool9/9/2011 21:45:139/9/2011 21:45:13 TO CONNECT NEXT PHONES09/09/2011 21:45:13 X10 Xperia, E10 Xperia Mini, E15 Xperia X8, U20 Xperia Mini Pro9/9/2011 21:45:13 LT15 Xperia ARC, MT15 Xperia NEO, R800 Xperia PLAY09/09/2011 21:45:13 PRESS AND HOLD "BACK" BUTTON ...9/9/2011 21:45:1309/09/2011 21:45:13 PLEASE attach Turned OFF PHONE NOW9/9/2011 21:45:1309/09/2011 21:45:46 RUNNING S1_EROM VER "r8A029"09/09/2011 21:45:46 SOFTWARE AID: 000109/09/2011 21:45:46 LOADER AID: 000109/09/2011 21:45:49 FLASH ID: "002C/00BC"09/09/2011 21:45:49 LOADER VERSION: "R4A045"9/9/2011 21:45:4909/09/2011 21:45:49 MODEL (from GDFS): X809/09/2011 21:45:49 SOFTWARE VERSION: 1236-9291_2.1.1.A.0.609/09/2011 21:45:49 CUSTOM VERSION: 1241-3178_R1B09/09/2011 21:45:49 filesystem VERSION: WORLD-1-8_2.1.1.A.0.609/09/2011 21:45:49 SERIAL NO: CB511SPH7Q09/09/2011 21:45:49 SEMC SIMLOCK CERTIFICATE09/09/2011 21:45:49 Elapsed: 36 secs. If the simlock certificate specified is SEMC SIMLOCK CERTIFICATE, or anything other than NOT Recognized SIMLOCK CERTIFICATE, or if you are sure you sim-unlocked phone using Omnius, continue to step 3.Jika simlock certificate specified NOT Recognized SIMLOCK CERTIFICATE, you can not UnlockBootloader your phone. If you try, your phone radio capability will be lost. Please note that the SIMLOCK certificate does not mean that you have / do not have sim lock your phone. 3. Disconnect the phone from your computer, boot up, and then re Connect your phone to your computer. 4. Tick USB debugging on your phone. Note: Do not run Flashtool and the expiration of any ADB.exe process you find in task manager before doing step 5. 5. If you have1: SEMC SIMLOCK CERTFICATE message or if you2: Unlock your phone uses the Emma / IMEI3: or if your phone has been unlocked when you buy4: or if your phone is sim-locked, or if ... NOT CONFIRMED, TRY AT YOUR OWN RISK! 5: your phone is sim unlocked via the PC application to3 (which is not Omnius) and not SETool2,
Then run msm7227_semc.cmd in the directory you unzipped the file msm7227p and press any key to start the process of opening. Alternatively, you can use Flashtool v0.6.7.0 for UnlockBootloader your phone (if you want to use Flashtool, go to step 5c). Go to step 5B2. if you1: no SEMC SIMLOCK CERTIFICATE message and do not have the message NOT Recognized SIMLOCK CERTIFICATE 2: or if you sim-unlocked phone using SEtool2, so go to step 5a. [/ U] [/ B] 5a. Run msm7227_Setool2.cmd in the directory you unzipped the file msm7227p and press any key to start the process. Alternatively, you can use Flashtool v0.6.7.0 for UnlockBootloaderi your phone (if you want to use Flashtool, go to step 5c) if you1: know that your phone is using Omnius sim-unlocked, so go to step 5B1. 5B1. Run msm7227_OmniusSL.cmd in the directory you unzipped the file msm7227p and press any key to start the process. Alternatively, you can use Flashtool v0.6.7.0 for UnlockBootloader your phone (if you want to Flashtool, go to step 5c). 5B2. Open the sample log is included in the file. Wait 5 minutes. Then, compare the text under the SAME ataw not like the log. log should be is the same as below. Also, the last message in the log is the Press any key to continue. Text in the log example: Requires process standard 2.x android firmware.Press Any key to continue. . .Getting ROOT rights.1743 KB / s (585731 bytes in 0.328s)error: protocol fault (no status)Waiting ...Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.192 KB / s (3087 bytes in 0.015s)successWaiting ...Getting ROOT rights.Waiting ...Writing patched semcboot. Two step processFirst, we need get access to semcboot area504 KB / s (8064 bytes in 0.015s)Second, we need to write semcboot ;)1130 KB / s (596916 bytes in 0.515s)successfully wrote 0003ff00Press Any key to continue. . . Note: If your log is very different from this please check if your bootloader is locked using step 7. If it is not locked, turn off your antivirus and repeat step 5 again. If you get some "error: protocol fault" message, which is fully ok, this is because the "problem" is that your phone has rebooted and USB debugging mode is not switched on when to reboot so it can not obtain the status and have error. If you get a lot of "Access is denied" message, turn off your antivirus and try again. 5c. Run Flashtool, connect your phone and then wait for your phone to be recognized. Then, go to: Plugins / (insert device name here) Unlock / run A screen will appear and ask you to connect your phone in flashmod 1. Unplug the USB cable from your phone.2. Turn off your phone.3. Press and hold the "Back" button on your phone.4. Plug in the USB cable to your phone.5. Release the "Back" button after the screen that appears to disappear. Open process will begin. Wait until Flashtool ask you to disconnect the cable from the phone, then turn hp usb cable and connect it again. Wait for Flashtool to include the necessary files to your phone. After a while, Flashtool will have the message "Successfully Applied unlock" and the phone will reboot. 6. Disconnect your phone from PC. Congratulations, you have unlocked bootloader phone now! # For self betul2 wanted / want to unlock bootloader very passionate bleh refer this pagehttp://forum.xda-developers.com/showthread.php?t=1506502
Unlockbootloader myths about what can do
1. Real dual touch for synaptic devices.
2. Higher overclock CPU max frequency.
3. Sim unlock your phone (allowing use any carrier)
Before I start, here I emphasize that the bootloader is verydangerous and will result in hard brick if you do not follow the instructions properly. Then you need to go to repair your phone by sending it to SE. I will not be responsible if your phone died because you did not follow the instructions or your own self do wrong. I also need to emphasize here that this may cancel your hp warranty.
Still interested? please see details below.
Requirements: Root phone, the Sony Ericsson PC Companion installed kat PC AND Courage.
You do not need to have a sim lock your phone to make UnlockBootloader.
Recommended: Disable your antivirus (it might find a "virus" in ADB.exe although none of the actual virus. Use the stock rom.
Note: Opening UnlockBootloader, your phone will restore the original sim lock your phone. unless you have a key to Emma / IMEIkod unlock or it is not factory-unlocked or if SE unlocked!
1. Downloading files needed to UnlockBootloader.
Link: http://www.mediafire.com/?k9rp060165j2v84
Files needed to determine whether your phone safe UnlockBootloader
S1tool Link: http://www.mediafire.com/?0q97l5fs20pj947
1a. Download Flashtool once (required S1tool to function properly and to Flash Custom kernal in the future) and Install (not necessary if you already have Flashtool):
Download and Install Flashtool v0.6.7.0 here: http://www.mediafire.com/?3tsqz6ppxp9eset
After Install, open the flashtool folder and open the drivers folder inside. Double-click on drivers.exe Flashtool Flashtool files and install-drivers.exe file.
Note: Installation of this Flashtool-drivers will detect for X8, X10 mini and X10mini pro. I'm not sure about from the W8 but I think that is also supported.
Then restart your computer.
Also, download and install Sony Ericsson PC Companion (not required if you already have the Sony Ericsson PC Companion on your computer) (required to process UnlockBootloader).
Link: http://www.sonyericsson.com/cws/supp...61?cc=gb&lc=enDirect download link: http://dl-www.sonyericsson.com/cws/d...01.217_Web.exe
Then double click the file. Exe and install Sony Ericsson PC Companion. connect your phone to the PC after doing this and open Sony Ericsson PC Companion. Make sure your phone is recognized by the Sony Ericsson PC Companion.
2.Unzip files needed to UnlockBootloader (S1tool and msm7227p) on your PC.
Note: If your antivirus finds virus in ADB.exe., Turn off the antivirus. There is no virus in ADB.exe
2a. Turn off your phone.
2b. Go to the directory you unzipped and run S1tool.exe S1tool. Then, click on IDENTIFY button before proceeding to step 2c.
2c. Boot your phone into flashmod (make sure you install Flash Driver in step 1a 1). All users, press the back button while connecting cable from the PC to the phone. Continue to press the back button until you get output. LED on your phone should flash green if it is in flashmod.
Sample output:
9/9/2011 21:41:44 Welcome to S1 identify tool9/9/2011 21:45:139/9/2011 21:45:13 TO CONNECT NEXT PHONES09/09/2011 21:45:13 X10 Xperia, E10 Xperia Mini, E15 Xperia X8, U20 Xperia Mini Pro9/9/2011 21:45:13 LT15 Xperia ARC, MT15 Xperia NEO, R800 Xperia PLAY09/09/2011 21:45:13 PRESS AND HOLD "BACK" BUTTON ...9/9/2011 21:45:1309/09/2011 21:45:13 PLEASE attach Turned OFF PHONE NOW9/9/2011 21:45:1309/09/2011 21:45:46 RUNNING S1_EROM VER "r8A029"09/09/2011 21:45:46 SOFTWARE AID: 000109/09/2011 21:45:46 LOADER AID: 000109/09/2011 21:45:49 FLASH ID: "002C/00BC"09/09/2011 21:45:49 LOADER VERSION: "R4A045"9/9/2011 21:45:4909/09/2011 21:45:49 MODEL (from GDFS): X809/09/2011 21:45:49 SOFTWARE VERSION: 1236-9291_2.1.1.A.0.609/09/2011 21:45:49 CUSTOM VERSION: 1241-3178_R1B09/09/2011 21:45:49 filesystem VERSION: WORLD-1-8_2.1.1.A.0.609/09/2011 21:45:49 SERIAL NO: CB511SPH7Q09/09/2011 21:45:49 SEMC SIMLOCK CERTIFICATE09/09/2011 21:45:49 Elapsed: 36 secs. If the simlock certificate specified is SEMC SIMLOCK CERTIFICATE, or anything other than NOT Recognized SIMLOCK CERTIFICATE, or if you are sure you sim-unlocked phone using Omnius, continue to step 3.Jika simlock certificate specified NOT Recognized SIMLOCK CERTIFICATE, you can not UnlockBootloader your phone. If you try, your phone radio capability will be lost. Please note that the SIMLOCK certificate does not mean that you have / do not have sim lock your phone. 3. Disconnect the phone from your computer, boot up, and then re Connect your phone to your computer. 4. Tick USB debugging on your phone. Note: Do not run Flashtool and the expiration of any ADB.exe process you find in task manager before doing step 5. 5. If you have1: SEMC SIMLOCK CERTFICATE message or if you2: Unlock your phone uses the Emma / IMEI3: or if your phone has been unlocked when you buy4: or if your phone is sim-locked, or if ... NOT CONFIRMED, TRY AT YOUR OWN RISK! 5: your phone is sim unlocked via the PC application to3 (which is not Omnius) and not SETool2,
Then run msm7227_semc.cmd in the directory you unzipped the file msm7227p and press any key to start the process of opening. Alternatively, you can use Flashtool v0.6.7.0 for UnlockBootloader your phone (if you want to use Flashtool, go to step 5c). Go to step 5B2. if you1: no SEMC SIMLOCK CERTIFICATE message and do not have the message NOT Recognized SIMLOCK CERTIFICATE 2: or if you sim-unlocked phone using SEtool2, so go to step 5a. [/ U] [/ B] 5a. Run msm7227_Setool2.cmd in the directory you unzipped the file msm7227p and press any key to start the process. Alternatively, you can use Flashtool v0.6.7.0 for UnlockBootloaderi your phone (if you want to use Flashtool, go to step 5c) if you1: know that your phone is using Omnius sim-unlocked, so go to step 5B1. 5B1. Run msm7227_OmniusSL.cmd in the directory you unzipped the file msm7227p and press any key to start the process. Alternatively, you can use Flashtool v0.6.7.0 for UnlockBootloader your phone (if you want to Flashtool, go to step 5c). 5B2. Open the sample log is included in the file. Wait 5 minutes. Then, compare the text under the SAME ataw not like the log. log should be is the same as below. Also, the last message in the log is the Press any key to continue. Text in the log example: Requires process standard 2.x android firmware.Press Any key to continue. . .Getting ROOT rights.1743 KB / s (585731 bytes in 0.328s)error: protocol fault (no status)Waiting ...Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.192 KB / s (3087 bytes in 0.015s)successWaiting ...Getting ROOT rights.Waiting ...Writing patched semcboot. Two step processFirst, we need get access to semcboot area504 KB / s (8064 bytes in 0.015s)Second, we need to write semcboot ;)1130 KB / s (596916 bytes in 0.515s)successfully wrote 0003ff00Press Any key to continue. . . Note: If your log is very different from this please check if your bootloader is locked using step 7. If it is not locked, turn off your antivirus and repeat step 5 again. If you get some "error: protocol fault" message, which is fully ok, this is because the "problem" is that your phone has rebooted and USB debugging mode is not switched on when to reboot so it can not obtain the status and have error. If you get a lot of "Access is denied" message, turn off your antivirus and try again. 5c. Run Flashtool, connect your phone and then wait for your phone to be recognized. Then, go to: Plugins / (insert device name here) Unlock / run A screen will appear and ask you to connect your phone in flashmod 1. Unplug the USB cable from your phone.2. Turn off your phone.3. Press and hold the "Back" button on your phone.4. Plug in the USB cable to your phone.5. Release the "Back" button after the screen that appears to disappear. Open process will begin. Wait until Flashtool ask you to disconnect the cable from the phone, then turn hp usb cable and connect it again. Wait for Flashtool to include the necessary files to your phone. After a while, Flashtool will have the message "Successfully Applied unlock" and the phone will reboot. 6. Disconnect your phone from PC. Congratulations, you have unlocked bootloader phone now! # For self betul2 wanted / want to unlock bootloader very passionate bleh refer this pagehttp://forum.xda-developers.com/showthread.php?t=1506502
